Semi-GuardingGSM-1500LS

HOME / Prodcuts / GSM-1500LS
CNC Vertical Milling Center GSM-1500LS
GSM-1500LS

GSM-1500LS

  • This machine is constructed with heavy-duty Meehanite cast iron to ensure high rigidity, wear resistance, and no deformation.
  • The X, Y and Z axis slideways are coated with Turcite-B to assure smoothness and abrasion resistance.
  • The X, Y, and Z axis adopt high precision double nuts pre-loaded type ball screws.
  • P4-grade precision bearing is adopted for the main spindle.
ITEMS UNITS GSM-1500L
TABLE
Worktable mm/inch 610x1854/24"x73"
T-slot mm 18 x 5 x 70
Table load capacity kgs 1500
MOVEMENT
X axis travel m/m 1500
Y axis travel m/m 850
Z axis Travel m/m 710
SPINDLE HEAD
Spindle taper   BT-40 (CAT-40)
Spindle speed rpm 6000 / Op:(8000, 10000, 12000)
Feed Rate m/min 0-5
Ballscrew diameter m/min Ø40
Rapid travel m/min 0-10 (0-20)
MOTORS
Spindle motor HP 15
Tool storage capacity   (20:24)
N.W. kgs 4800
G.W. kgs 5200
Packing measurement cm 315x226x254

• Specifications and design are subject to change without notice. ( ) Options

    STANDARD ACCESSORIES

  • Coolant Unit
  • Auto Lube System
  • Spindle Air Blast
  • Alarm Light
  • Heat Exchanger
  • Tool Box
  • Work Lamp

    OPTIONAL ACCESSORIES

  • Spindle Oil Cooler.
  • Power Source Transformer.
  • Armless type ATC (16T, 20T)
  • Arm type ATC (24T)
  • Coolant Thru Spindle.
  • 8000/10000/12000RPM spindle
  • Two-Speed Gearbox
  • Screw type chip conveyor.
  • Belt type chip conveyor.
  • CE Norms