Semi-GuardingGSM-2500S

HOME / Prodcuts / GSM-2500S
CNC Vertical Milling Center GSM-2500S
GSM-2500S

GSM-2500S

  • This machine is constructed with heavy-duty Meehanite cast iron to ensure high rigidity, wear resistance, and no deformation.
  • The X, Y and Z axis slideways are coated with Turcite-B to assure smoothness and abrasion resistance.
  • The X, Y, and Z axis adopt high precision double nuts pre-loaded type ball screws.
  • P4-grade precision bearing is adopted for the main spindle.
ITEMS UNITS GSM-2500
TABLE
Worktable mm/inch 813x2750/32"x108"
T-slot mm 18 x 5 x 125
Table load capacity kgs 2000
MOVEMENT
X axis travel m/m 2500
Y axis travel m/m 850
Z axis Travel m/m 710
SPINDLE HEAD
Spindle taper   BT-40 (CAT-50 DIN40)
Spindle speed rpm 6000
Feed Rate m/min 0-10
Ballscrew diameter m/min Ø50
Rapid travel m/min 0-10 (0-20)
MOTORS
Spindle motor HP 20
Tool storage capacity   (20;24)
N.W. kgs 9500
G.W. kgs 10000
Packing measurement cm 323x228x254
270x226x100

• Specifications and design are subject to change without notice. ( ) Options

    STANDARD ACCESSORIES

  • Coolant Unit
  • Auto Lube System
  • Spindle Air Blast
  • Alarm Light
  • Heat Exchanger
  • Tool Box
  • Work Lamp

    OPTIONAL ACCESSORIES

  • Spindle Oil Cooler.
  • Power Source Transformer.
  • Armless type ATC (16T, 20T)
  • Arm type ATC (24T)
  • Coolant Thru Spindle.
  • 8000/10000/12000RPM spindle
  • Two-Speed Gearbox
  • Screw type chip conveyor.
  • Belt type chip conveyor.
  • CE Norms