GSM-1000S

Cnc milling center, This machine is constructed with heavy-duty Meehanite cast iron to ensure high rigidity, wear resistance, and no deformation.
The X, Y and Z axis slideways are coated with Turcite-B to assure smoothness and abrasion resistance.
The X, Y, and Z axis adopt high precision double nuts pre-loaded type ball screws.
P4-grade precision bearing is adopted for the main spindle.

taiwan milling machine
BALL BAR:
To ensure best accuracy & alignment in circular path, machines are inspected by ball bar tested.

taiwan milling machine
LASER CALIBRATION:
All machines are measured & calibrated using laser calibration equipment to ensure precise verification & compensation of the machines and get the best accuracy & repeatability.

taiwan milling machine
Spindle

taiwan milling machine
Double nuts ballscrew
ITEMS UNITS GSM-1000
TABLE
Worktable mm/inch 406x1372/16"x54"
T-slot mm 16 x 3 x 64
Table load capacity kgs 600
MOVEMENT
X axis travel m/m 1000
Y axis travel m/m 500
Z axis Travel m/m 520 (600)
SPINDLE HEAD
Spindle taper   BT-40 (CAT-40)
Spindle speed rpm 8000 / Op:(10000)
Feed Rate m/min 0-5
Ballscrew diameter m/min Ø32
Rapid travel m/min 0-10 (0-20)
MOTORS
Spindle motor HP 10
Tool storage capacity   (16)
N.W. kgs 2900
G.W. kgs 3200
Packing measurement cm 195x226x250

• Specifications and design are subject to change without notice. ( ) Options

    STANDARD ACCESSORIES

  • Coolant Unit
  • Auto Lube System
  • Spindle Air Blast
  • Alarm Light
  • Heat Exchanger
  • Tool Box
  • Work Lamp

    OPTIONAL ACCESSORIES

  • Spindle Oil Cooler.
  • Power Source Transformer.
  • Armless Type ATC (16T, 20T)
  • Arm Type ATC (24T)
  • Coolant Thru Spindle.
  • 10000RPM spindle
  • Two-Speed Gearbox
  • Screw Type Chip Conveyor.
  • Belt Type Chip Conveyor.
  • CE Norms

Related Products

GSM-1700S

GSM-1700S

GSM-1510S

GSM-1510S

GSM-800S

GSM-800S

GSM-1500S

GSM-1500S

GSM-2500S

GSM-2500S

GSM-1500LS

GSM-1500LS