GSM-1520S
Bed milling machine, This machine is constructed with heavy-duty Meehanite cast iron to ensure high rigidity, wear resistance, and no deformation.
The X, Y and Z axis slideways are coated with Turcite-B to assure smoothness and abrasion resistance.
The X, Y, and Z axis adopt high precision double nuts pre-loaded type ball screws.
P4-grade precision bearing is adopted for the main spindle.
The X, Y and Z axis slideways are coated with Turcite-B to assure smoothness and abrasion resistance.
The X, Y, and Z axis adopt high precision double nuts pre-loaded type ball screws.
P4-grade precision bearing is adopted for the main spindle.
Model :
Bed Milling Machine

BALL BAR:
To ensure best accuracy & alignment in circular path, machines are inspected by ball bar tested.

LASER CALIBRATION:
All machines are measured & calibrated using laser calibration equipment to ensure precise verification & compensation of the machines and get the best accuracy & repeatability.

Spindle

Double nuts ballscrew
ITEMS | UNITS | GSM-1520 |
TABLE | ||
---|---|---|
Worktable | mm/inch | 610x1854/24"x73" |
T-slot | mm | 18 x 5 x 70 |
Table load capacity | kgs | 1300 |
MOVEMENT | ||
X axis travel | m/m | 1520 |
Y axis travel | m/m | 720 |
Z axis Travel | m/m | 700 |
SPINDLE HEAD | ||
Spindle taper | BT-40 (CAT-40) | |
Spindle speed | rpm | 8000 / Op: (10000) |
Feed Rate | m/min | 0-5 |
Ballscrew diameter | m/min | Ø40 |
Rapid travel | m/min | 0-20 |
MOTORS | ||
Spindle motor | HP | 10 |
Tool storage capacity | (16:20) | |
N.W. | kgs | 5000 |
G.W. | kgs | 5400 |
Packing measurement | cm | 300x228x254 |
• Specifications and design are subject to change without notice. ( ) Options
- Coolant Unit
- Auto Lube System
- Spindle Air Blast
- Alarm Light
- Heat Exchanger
- Tool Box
- Work Lamp
STANDARD ACCESSORIES
- Spindle Oil Cooler.
- Power Source Transformer.
- Armless Type ATC (16T, 20T)
- Arm Type ATC (24T)
- Coolant Thru Spindle.
- 10000RPM spindle
- Two-Speed Gearbox
- Screw Type Chip Conveyor.
- Belt Type Chip Conveyor.
- CE Norms