GSM-3000F
This machine is constructed with heavy-duty Meehanite cast iron to ensure high rigidity, wear resistance, and no deformation.
The X, Y and Z axis slideways are coated with Turcite-B to assure smoothness and abrasion resistance.
The X, Y, and Z axis adopt high precision double nuts pre-loaded type ball screws.
P4-grade precision bearing is adopted for the main spindle.
The X, Y and Z axis slideways are coated with Turcite-B to assure smoothness and abrasion resistance.
The X, Y, and Z axis adopt high precision double nuts pre-loaded type ball screws.
P4-grade precision bearing is adopted for the main spindle.
Model :
Bed Milling Machine

BALL BAR:
To ensure best accuracy & alignment in circular path, machines are inspected by ball bar tested.

LASER CALIBRATION:
All machines are measured & calibrated using laser calibration equipment to ensure precise verification & compensation of the machines and get the best accuracy & repeatability.

6 HARD BOX WAYS DESIGN:
Rigid, Solid and robus for a long service life.
HIGH STRENGTH STRUCTURE:
One piece 6-box way casting, heavy-duty, hi-stability.
ITEMS | UNITS | GSM-3000 |
TABLE | ||
---|---|---|
Worktable | mm/inch | 813x3200/32"x126" |
T-slot | mm | 18 x 7 x 100 |
Table load capacity | kgs | 2200 |
MOVEMENT | ||
X axis travel | m/m | 3000 |
Y axis travel | m/m | 900 |
Z axis Travel | m/m | 750 |
SPINDLE HEAD | ||
Spindle taper | BT-50 (CAT-50) | |
Spindle speed | rpm | 6000 |
Feed Rate | m/min | 0-10 |
Ballscrew diameter | m/min | Ø80 (Ø63) |
Rapid travel | m/min | 0-10 (0-20) |
MOTORS | ||
Spindle motor | HP | 20 |
Tool storage capacity | (20;24) | |
N.W. | kgs | 15600/1100/1100 |
G.W. | kgs | 16000/1300/1100 |
Packing measurement | cm |
610x228x254 240x226x150 180x226x110 |
• Specifications and design are subject to change without notice. ( ) Options
- Coolant Unit
- Auto Lube System
- Spindle Air Blast
- Alarm Light
- Heat Exchanger
- Tool Box
- Work Lamp
STANDARD ACCESSORIES
- Spindle Oil Cooler.
- Power Source Transformer.
- Armless Type ATC (16T, 20T)
- Arm Type ATC (24T)
- Coolant Thru Spindle.
- 10000RPM spindle
- Two-Speed Gearbox
- Screw Type Chip Conveyor.
- Belt Type Chip Conveyor.
- CE Norms