GSM-800F
BT-40
X- 800,Y-400, Z-450
Vertical cnc machine, This machine is constructed with heavy-duty Meehanite cast iron to ensure high rigidity, wear resistance, and no deformation.
The X, Y and Z axis slideways are coated with Turcite-B to assure smoothness and abrasion resistance.
The X, Y, and Z axis adopt high precision double nuts pre-loaded type ball screws.
P4-grade precision bearing is adopted for the main spindle.
X- 800,Y-400, Z-450
Vertical cnc machine, This machine is constructed with heavy-duty Meehanite cast iron to ensure high rigidity, wear resistance, and no deformation.
The X, Y and Z axis slideways are coated with Turcite-B to assure smoothness and abrasion resistance.
The X, Y, and Z axis adopt high precision double nuts pre-loaded type ball screws.
P4-grade precision bearing is adopted for the main spindle.
Model :
Bed Milling Machine
BALL BAR:
To ensure best accuracy & alignment in circular path, machines are inspected by ball bar tested.
LASER CALIBRATION:
All machines are measured & calibrated using laser calibration equipment to ensure precise verification & compensation of the machines and get the best accuracy & repeatability.
Spindle
Double nuts ballscrew
| ITEMS | UNITS | GSM-800 |
| TABLE | ||
|---|---|---|
| Worktable | mm/inch | 355x1270/14"x50" |
| T-slot | mm | 16 x 3 x 64 |
| Table load capacity | kgs | 500 |
| MOVEMENT | ||
| X axis travel | m/m | 800 |
| Y axis travel | m/m | 400 |
| Z axis Travel | m/m | 450 |
| SPINDLE HEAD | ||
| Spindle taper | BT-40 (CAT-40) | |
| Spindle speed | rpm | 8000 / Op:(10000) |
| Feed Rate | m/min | 0-5 |
| Ballscrew diameter | m/min | Ø32 |
| Rapid travel | m/min | 0-10 |
| MOTORS | ||
| Spindle motor | HP | 7.5 |
| Tool storage capacity | (16) | |
| N.W. | kgs | 2800 |
| G.W. | kgs | 3100 |
| Packing measurement | cm | 310x228x240 |
• Specifications and design are subject to change without notice. ( ) Options
- Coolant Unit
- Auto Lube System
- Spindle Air Blast
- Alarm Light
- Heat Exchanger
- Tool Box
- Work Lamp
STANDARD ACCESSORIES
- Spindle Oil Cooler.
- Power Source Transformer.
- Armless Type ATC (16T, 20T)
- Arm Type ATC (24T)
- Coolant Thru Spindle.
- 10000RPM spindle
- Two-Speed Gearbox
- Screw Type Chip Conveyor.
- Belt Type Chip Conveyor.
- CE Norms
