GMV-800
Model :
CNC Vertical Machining Center
HIGH SPEED:
HIGH PRECISION MACHINING CENTER.
EXCELLENT DESIGN OF MACHINING CENTERUCTION ,Cnc Vertical Milling Machine
HIGH RIGIDITY/HIGH STABILITY/OUTSTANDING PERFORMANCE
Vertical Milling Centre /Cnc Milling Machine center
-
Adopting Meehinate cast iron, stable
quality and construction to assure
machine body stable. -
With wide machine base, box structure
column, wide & longer saddle, heavy
duty supporting design and solid
structure to assure the accuracy of
workpiece while machining. -
With wide span design of Y axis,
entire & solid construction. -
Spindle head with reinforced ribs
makes spindle stable while machining.
X axis
Y axis
Z axis
-
Three
Axes Linear Ways
X, Y, Z axes are equipped with high precision linear ways with features, including low friction co-efficiency, zero gap at vertical and cross directions and resistance to full loads. It provides dynamic stability and precise position & accuracy of liner ways.
-
Precision
Ball Screw
The class C3 high precision ball screws with pretensioned treatment upgrades the rigidity of the rotary transmission system and minimize positioning errors due to thermal expansion of ball screws and assure machining accuracy at all times.
-
Direct-drive
Ball screws
The three axes ball screws are directly driven by 3 axes servo motors through couplings to promote accuracy and repeatability accuracy.
-
Direct-drive
on Z axis
The Z axis is directly driven by strong horse power to assure smooth and rapid movement on Z axis, immediate response and upgraded efficiency.
OPTIONS
Two speed gear box
Coolant thru spindle
oil skimmer
4th axis & 5th axis
rotary table & tiliting head
Spindle oil cooler
Belt type chip conveyor
| Machine Specification |
|
GMV-800 |
|
Table / Unit |
||
|---|---|---|
| Worktable | mm/inch | 900 x 500 |
| T-slot | mm | 5 x 18 x 100 |
| Table load capacity | kgs | 500 |
| MOVEMENT | ||
| X axis travel | m/m | 800 |
| Y axis travel | m/m | 500 |
| Z axis Travel | m/m | 580 |
| Spindle nose to table surface |
m/m |
120 - 700 |
| SPINDLE HEAD | ||
| Spindle taper | BT-40 / CAT 40 / DIN 40 | |
| Spindle speed | rpm | 10000 |
| Feed Rate | m/min | 1 - 15 |
| Ball screw diameter | m/min | - |
| Rapid travel | m/min | - |
| MOTORS | ||
| Spindle | kw | 5.5-7.5 |
| Servo | kw |
X/Y 1.5 , Z - 2 |
|
Tool system |
||
| Armless type | pcs | 20 |
|
Arm type |
pcs | 24 |
| Packing | cm | 233 x 257 x 277 |
| N.W. | kgs | 4500 |
| G.W. | kgs | - |
• Specifications and design are subject to change without notice.
- Full-guarding
- Auto lube system
- Spindle Air Blast
- Alarm Light
- Heat Exchanger
- Arm type ATC 24 T
- Coolant unit
- Screw type chip conveyor
- 3 axes cover
- Tool Box
- Work Lamp
- Manual and part list
STANDARD ACCESSORIES
- Spindle Oil Cooler.
- 10000 , 12000 rpm spindle
- Armless type ATC (20T, 24T)
- Coolant Thru Spindle.
-
CNC Tilting Rotary Table
- Power Source Transformer.
- Two-Speed Gear Box
- Belt type chip conveyor.
- Linear scale with 3 axes.
- Auto tool length measuring device.
- Auto work piece measuring device.
- CE Norms.
OPTIONAL ACCESSORIES
CONSTRUCTION DESIGN WITH HIGH RIGIDITY AND
HIGH PRECISION
-
Linear ways with zero gap arc cutting, slant
cutting and average surface lines.
-
Linear ways with rolling movement instead of
sliding movement, low friction,
ests have ath 520 560 s rapid response and high positioning accuracy.
-
Suitable for high speed cutting and increasing
efficiency.
-
Adopting
the spindle with high rigidity, it upgrades not only cutting accuracy but
also extends working life.
SPINDLE
LINEAR WAYS
MTSUBISHI
SIEMENS
FAGOR
FANUC
