GMV-1020 CNC Vertical Machining Center with linear way structure | Reliable CNC Full-Guarding Milling Machines for Enhanced Safety

CNC Vertical Machining Center with linear way structure (X: 1020, Y: 550, Z: 580) | Custom CNC milling machines for metalworking

CNC Vertical Machining Center - GMV-1020 CNC Vertical Machining Center with linear way structure
  • CNC Vertical Machining Center - GMV-1020 CNC Vertical Machining Center with linear way structure

CNC Vertical Machining Center

GMV-1020

CNC Vertical Machining Center with linear way structure (X: 1020, Y: 550, Z: 580)

GMV-1020 model is with general specification and middle workable table in CNC Vertical machining center product line from GENG-SHUEN CO., LTD, which model easily implements in high-accuracy cutting operation.

GMV-1020 model be designed in linear way structure for high-speed cutting and accuracy performance. The characteristics of GSM linear way machining center is for low friction co-efficiency, zero gap at vertical and cross directions and resistance to heavy loading.

The worktable size of machine is for 1190 x 550mm (47" x 22") and table loading capability is 800 (kgs) to fulfill project application. The machine body is constructed with Meehanite cast iron to ensure high rigidly, and stability for workpiece support. Moreover, bottom of column is specially designed with A-shaped structure to ensure machine stability in operation.

The three axes ball screws are directly driven by 3 axes servo motors through couplings to perform fast cutting feed rate and promote accuracy. To adopt CNC vertical machining center will bring solid advantages in high-precision, high-accuracy and high-performance to raise up cost-effective and operational cycle time.

High Rigidity
  • The base, column, saddle and worktable of CNC vertical machining center are manufactured from high quality Meehanite cast iron, stress relieved for high stability.
  • High rigid (ball-screw) provides reliable transmission for high-speed processing.
Highly Precision
  • GMV-1020 built in linear ways design for high-speed cutting and efficiency in machine operation.
  • Linear way with sliding movement is the advantage in fast cutting feed rate, low friction, and high position accuracy.
  • The spindle adopts super precision angular contact ball bearings. Spindle built in belt type for 10000rpm; 12000 / 15000rpm direct-drive spindle can be optional.
High Performance
  • Choice of FANUC, MITSUBISHE, MESIMES, FAGOR, CNC control.
  • With Ball Bar Testing: CNC bed type milling machines are inspected by ball bar tested to ensure best accuracy & alignment in circular path. With operator protections are provided including complete enclosures which allow a perfect chip disposal and can be the noise damper.
  • With Laser Calibration: All of GSM CNC milling machines are measured & calibrated using laser calibration equipment to ensure precise verification & compensation of the machines and get the best accuracy & repeatability.
Standard Accessories
  • Controller of 4 brands FANUC, MITSUBISHI, SIEMENS, FARGOR for selectable.
  • 3-Axis Telescopic Cover.
  • Work Lamp.
  • Auto Lubrication System.
  • Coolant System (Pump).
  • Three-Color Call Light.
  • Tool Box.
  • Heat Exchanger.
  • Spindle Oil Cooler.
  • Full Splash Guard.
  • Coolant Gun.
  • Arm Type ATC 24 Tools (BT-40).
  • Screw Type Chip Conveyor + Trolley.
Optional Accessories
  • Power Transformer.
  • Rear Coolant Flushing Device.
  • Coolant Thru Spindle.
  • Oil Separator.
  • Roller Type Linear Guideway.
  • Armless Type ATC 20 Tools (BT-40).
  • Two-Way Gear Box.
  • Renishaw TS-27R Tool Settler.
  • Renishaw OMP-60 Touch Probe.
  • Simple Type CTS 20 ~ 40bar.
  • CTS 20 ~ 40bar + Paper Filter.
  • 4 Axis Rotary Table.
  • CE Norm.
Machine Specification
Machine Specificaiton GMV-1020
Table / Unit
Worktable mm/inch 1190 x 550 / 46.8" x 21.6"
T-Slot mm/inch 4 x 18 x 125
Table Load Capacity kgs 800
Movement
X Axis Travel mm 1020
Y Axis Travel mm 550
Z Axis Travel mm 580
Spindle Head
Spindle Taper BT-40 (CAT-40 / DIN 40)
Spindle Speed rpm 10000
Cutting Feed Rate mm/min 1-15000
Spindle Motor kw 7.5 / 11
Rapid Travel (X, Y, Z) m/min 30 / 30 / 24
Arm Type ATC
Max.Tool Diameter mm 75 / 150
Max.Tool Length mm 250
Max.Tool Weight kgs 7
Tool Storage Capacity pcs 24
Packing
N.W. kgs 6800
Packing Measurement cm 345 x 262 x 285
Gallery

CNC Vertical Machining Center | Custom CNC Machining Accessories for Optimized Performance

GENG-SHUEN CO., LTD (GSM) specializes in the manufacture of high-performance CNC Vertical Machining Center. Established in 1991, the company offers a range of products including CNC Vertical Machining Centers, CNC Bed Type Full-guarding Milling Machines, and CNC Bed Type Semi-guarding Milling Machines. With over 30 years of experience, GSM integrates advanced technology and innovation to meet the high-end market demands. Their products are designed to enhance productivity and precision in machining operations, supported by a dedicated R&D team focused on continuous improvement and technological cooperation with EU and American manufacturers.

The CNC Bed Type Full-guarding Milling Machines from GSM provide enhanced safety and operational performance. These machines feature full guarding to protect operators and ensure a safe working environment. Designed for heavy-duty machining applications, they offer high rigidity, stability, and precision, reflecting GSM's commitment to safety and quality.

GSM has been providing customers with affordable CNC milling machines for industrial use since 1991, both with advanced technology and 25 years of experience, GSM ensures that each customer's requirements are met.