CNC Bed Type Semi-guarding Milling Machine
CNC Vertical Milling Machine
GSM-3000 model has a largest work table in GSM CNC bed type milling machines, which model can cope with workpieces of 813 x 3200mm (32" x 126"). For bigger workpieces, the loading capability of table is for 2,200 kgs. This model aims to the large workpiece size in heavy-duty cutting operation.
GSM-3000 model be designed in 6 box guideway structure as cutting particularly tough and hard materials is the preferred. For heavy-duty cutting, we will generally recommend to have box guideway constructure design to fulfil in powerful spindle torque and stability operation requirement. All casting irons in GSM brand machine be designed and manufactured in TAIWAN.
This model supports to high power direct drive spindle for excellent operation and longer X & Z axis travel are good for large size adopt with stability & flexibility cutting capability. GSM-3000S is an excellence choice in high performance and cost-effective model to compare with double-column series.
With P2-grade precision bearing is adopted for the main spindle to directly assembled for maximum level of support. Moreover, precise accuracy is for C3 level. Numerous configuration and equipment options provide the ideal solution for any job.
- GSM-3000S built in 6 box guideways design for stability heavy duty cutting and robus for a long service life.
- The base, column, saddle and worktable of CNC bed type box guideway milling machine are manufactured from high quality Meehanite cast iron, stress relieved for high stability. All GSM CNC bed type milling machines are designed and made in TAIWAN.
- The X, Y, and Z axis sideways are hardend, precision ground, which be coasted with Turcited-B for maximum wear resistance. Over 40 industrial experiences in hand scraping technology makes the stability and durability of high-quality production capability in all CNC bed type milling machines of GSM brands.
- Spindle: GENG-SHUEN use main spindle which is equipped with a P2 grade precise heavy bearing for sustaining a wide range of radial and axial direction forces.
- Bearing: The spindle adopts precision NSK bearings, high speed, high precision, and the maximum speed can reach 6,000rpm.
- Double Nuts Ball Screw: It greatly increases the transmission rigidity and eliminates the effect of thermal deformation during movement, thus ensuring the positioning accuracy and repeat positioning accuracy of the machine tool.
- Choice of FANUC, MITSUBISHE, MESIMES, FAGOR, and SYNTEC CNC control.
- With Ball Bar Testing: CNC bed type milling machines are inspected by ball bar tested to ensure best accuracy & alignment in circular path. With operator protections are provided including complete enclosures which allow a perfect chip disposal and can be the noise damper.
- With Laser Calibration: All of GSM CNC milling machines are measured & calibrated using laser calibration equipment to ensure precise verification & compensation of the machines and get the best accuracy & repeatability.
- Controller of 5 brands FANUC, MITSUBISHI, SIEMENS, FARGOR AND SYNTEC for selectable.
- 3-axis telescopic cover.
- LED work lamp.
- Auto lubrication system.
- Coolant system (pump).
- Tool box.
- Heat exchanger.
- Spindle oil cooler.
- Semi-guarding: W / table splash guard and interlock.
- Power Transformer (380V / 50HZ / 3PH).
- Armless type ATC-20T.
- Arm type ATC-24T.
- Pull stud.
- Coolant Thru spindle.
- Two-way gear box.
- Renishaw TS-27R tool settler.
- Renishaw OMP-60 touch probe.
- Oil separator.
- Simple type CTS 20 ~ 40bar.
- CTS 20 ~ 40bar + paper filter.
- 4 axis rotary table.
- CE Norm.
|Worktable||mm/inch||813 x 3200 / 32" x 126"|
|T-Slot||mm||18 x 7 x 100|
|Table Load Capacity||kgs||2200|
|X Axis Travel||m/m||3000|
|Y Axis Travel||m/m||900|
|Z Axis Travel||m/m||750|
|3 Axis Drive||Direct Drive|
|Spindle Taper||BT-50 (CAT-50 DIN50)|
|Ball Screw Diameter||m/min||Ø 80 (Ø 63)|
|Rapid Travel||m/min||0-10 (0-20)|
|Tool Storage Capacity||(20; 24)|
|N.W.||kgs||14600 / 1100 / 800|
|G.W.||kgs||15000 / 1500 / 1000|
|Packing Measurement||cm||610 x 228 x 254|
240 x 226 x 150
180 x 226 x 110
CNC Bed Type Semi-guarding Milling Machine | Efficient CNC Bed Mills for Precision Work | GSM
Located in Taiwan since 1991, GENG-SHUEN CO., LTD has been a CNC milling and machining machine manufacturer. Its main CNC machining machines include, CNC Bed Type Semi-guarding Milling Machine, bed-type CNC milling machines, CNC vertical machining centers, CNC full-guarding CNC milling machines, semi-guarding CNC milling machines and CNC machining accessories such as high-pressure coolant through spindles, CNC rotary tables, screw-type chip conveyors and automatic tool changers (ATC), which enable precise and automated machining operations with CE certification.
GENG-SHUEN CO., LTD was established in 1991, pioneering specifically in the manufacturing of Copy Milling Machines & Metal Working Machine & Machine Tools. Our R&D team are steadfast, continuously on watch for new requirements in the machining industry. It is the company's aim to establish an even higher position in the high-end market through innovation, refined technology, and nurturing relationships of technological cooperation with EU and American CNC manufacturers.
GSM has been providing customers with high performance CNC milling and machining machines since 1991, with both advanced technology and 25 years of experience, GSM ensures that each customer's requirements are met.