GMV-1020 CNC Vertical Machining Center with linear way structure | Efficient CNC Bed Mills for Precision Work | GSM

CNC Vertical Machining Center with linear way structure (X: 1020, Y: 550, Z: 580) | All GSM CNC Bed Type Milling Machines are designed and made in TAIWAN.

CNC Vertical Machining Center - GMV-1020 CNC Vertical Machining Center with linear way structure
  • CNC Vertical Machining Center - GMV-1020 CNC Vertical Machining Center with linear way structure

CNC Vertical Machining Center

GMV-1020

CNC Vertical Machining Center with linear way structure (X: 1020, Y: 550, Z: 580)

GMV-1020 model is with general specification and middle workable table in CNC Vertical machining center product line from GENG-SHUEN CO., LTD, which model easily implements in high-accuracy cutting operation.

GMV-1020 model be designed in linear way structure for high-speed cutting and accuracy performance. The characteristics of GSM linear way machining center is for low friction co-efficiency, zero gap at vertical and cross directions and resistance to heavy loading.

The worktable size of machine is for 1190 x 550mm (47" x 22") and table loading capability is 800 (kgs) to fulfill project application. The machine body is constructed with Meehanite cast iron to ensure high rigidly, and stability for workpiece support. Moreover, bottom of column is specially designed with A-shaped structure to ensure machine stability in operation.

The three axes ball screws are directly driven by 3 axes servo motors through couplings to perform fast cutting feed rate and promote accuracy. To adopt CNC vertical machining center will bring solid advantages in high-precision, high-accuracy and high-performance to raise up cost-effective and operational cycle time.

High Rigidity
  • The base, column, saddle and worktable of CNC vertical machining center are manufactured from high quality Meehanite cast iron, stress relieved for high stability.
  • High rigid (ball-screw) provides reliable transmission for high-speed processing.
Highly Precision
  • GMV-1020 built in linear ways design for high-speed cutting and efficiency in machine operation.
  • Linear way with sliding movement is the advantage in fast cutting feed rate, low friction, and high position accuracy.
  • The spindle adopts super precision angular contact ball bearings. Spindle built in belt type for 10000rpm; 12000 / 15000rpm direct-drive spindle can be optional.
High Performance
  • Choice of FANUC, MITSUBISHE, MESIMES, FAGOR, CNC control.
  • With Ball Bar Testing: CNC bed type milling machines are inspected by ball bar tested to ensure best accuracy & alignment in circular path. With operator protections are provided including complete enclosures which allow a perfect chip disposal and can be the noise damper.
  • With Laser Calibration: All of GSM CNC milling machines are measured & calibrated using laser calibration equipment to ensure precise verification & compensation of the machines and get the best accuracy & repeatability.
Standard Accessories
  • Controller of 4 brands FANUC, MITSUBISHI, SIEMENS, FARGOR for selectable.
  • 3-Axis Telescopic Cover.
  • Work Lamp.
  • Auto Lubrication System.
  • Coolant System (Pump).
  • Three-Color Call Light.
  • Tool Box.
  • Heat Exchanger.
  • Spindle Oil Cooler.
  • Full Splash Guard.
  • Coolant Gun.
  • Arm Type ATC 24 Tools (BT-40).
  • Screw Type Chip Conveyor + Trolley.
Optional Accessories
  • Power Transformer.
  • Rear Coolant Flushing Device.
  • Coolant Thru Spindle.
  • Oil Separator.
  • Roller Type Linear Guideway.
  • Armless Type ATC 20 Tools (BT-40).
  • Two-Way Gear Box.
  • Renishaw TS-27R Tool Settler.
  • Renishaw OMP-60 Touch Probe.
  • Simple Type CTS 20 ~ 40bar.
  • CTS 20 ~ 40bar + Paper Filter.
  • 4 Axis Rotary Table.
  • CE Norm.
Machine Specification
Machine SpecificaitonGMV-1020
Table / Unit
Worktablemm/inch1190 x 550 / 46.8" x 21.6"
T-Slotmm/inch4 x 18 x 125
Table Load Capacitykgs800
Movement
X Axis Travelmm1020
Y Axis Travelmm550
Z Axis Travelmm580
Spindle Head
Spindle TaperBT-40 (CAT-40 / DIN 40)
Spindle Speedrpm10000
Cutting Feed Ratemm/min1-15000
Spindle Motorkw7.5 / 11
Rapid Travel (X, Y, Z)m/min30 / 30 / 24
Arm Type ATC
Max.Tool Diametermm75 / 150
Max.Tool Lengthmm250
Max.Tool Weightkgs7
Tool Storage Capacitypcs24
Packing
N.W.kgs6800
Packing Measurementcm345 x 262 x 285
Gallery

CNC Vertical Machining Center | Efficient CNC Bed Mills for Precision Work | GSM

Located in Taiwan since 1991, GENG-SHUEN CO., LTD has been a CNC milling and machining machine manufacturer. Its main CNC machining machines include, CNC Vertical Machining Center, bed-type CNC milling machines, CNC vertical machining centers, CNC full-guarding CNC milling machines, semi-guarding CNC milling machines and CNC machining accessories such as high-pressure coolant through spindles, CNC rotary tables, screw-type chip conveyors and automatic tool changers (ATC), which enable precise and automated machining operations with CE certification.

GENG-SHUEN CO., LTD was established in 1991, pioneering specifically in the manufacturing of Copy Milling Machines & Metal Working Machine & Machine Tools. Our R&D team are steadfast, continuously on watch for new requirements in the machining industry. It is the company's aim to establish an even higher position in the high-end market through innovation, refined technology, and nurturing relationships of technological cooperation with EU and American CNC manufacturers.

GSM has been providing customers with high performance CNC milling and machining machines since 1991, with both advanced technology and 25 years of experience, GSM ensures that each customer's requirements are met.